Vega capabilities

SOLIDWORKS parts, just by asking

Describe the part and Vega models it with real SOLIDWORKS features: sketches, extrusions, holes, fillets and patterns, ready to keep editing.

See examples Request a demo

Real examples

Ask it like this

Every example is a real task done with Vega in SOLIDWORKS. Copy the request and try it with your own parts.

Base plate with holes

Vega models the plate with real SOLIDWORKS features: sketch, extrusion, fillets and Hole Wizard holes, ready to keep editing.

Request

Create a 300 x 200 x 15 mm base plate in S275JR steel, with the four corners rounded to R10, four Ø14 through holes 25 mm from the edges and an M16 tapped through hole in the centre.

Task time

1 min 6 s

Approx. cost

€0.01

Share
Gearmotor output shaft

Steps, chamfers, DIN 6885 keyway, DIN 471 retaining-ring groove and DIN 332 centre holes in a single request.

Request

Create a gearmotor output shaft in C45E steel, 330 mm long, with these steps from left to right: Ø40 k6 x 80 with a DIN 6885 keyway for a 12 x 8 key, 70 mm long; a Ø45 x 30 shoulder; Ø40 k6 x 160 for a bearing, with a DIN 471 retaining-ring groove at its end; and Ø35 h6 x 60. Chamfers on both ends and a DIN 332 form D centre hole in each one.

Task time

55 s

Approx. cost

€0.01

Share
Flange with a design table

Vega models the flange with its hole pattern and creates DN50, DN80 and DN100 from an Excel design table kept inside the part, ready to edit.

Request

Create a flat flange in S235JR steel with three configurations from a design table: DN50 (Ø165 x 18, Ø61 bore, 4 Ø18 holes on Ø125), DN80 (Ø200 x 20, Ø90 bore, 8 Ø18 holes on Ø160) and DN100 (Ø220 x 20, Ø115 bore, 8 Ø18 holes on Ø180), with the description BRIDA PLANA DN50, DN80 or DN100 in each one.

Task time

2 min 38 s

Approx. cost

€0.02

Share

Times and costs of the tasks in the videos are indicative: they depend on the size of the model and on what you ask for.

What Vega does

Parts from a description: sketches, extrusions, cuts, fillets, chamfers, mirrors and patterns.
Conceptual 3D sketch before modelling, in the browser: parts or the whole product in their colours, to rotate, check and change before anything is built.
Hole Wizard holes (through, tapped, countersunk and counterbored), single, in rows or in patterns.
Shafts for motors and gearmotors in one request: steps, chamfers, retaining-ring grooves, DIN 6885 keyways, DIN 332 centre holes and IEC shaft ends.
Ribs, sweeps, lofts, draft angles and cosmetic threads.
Variants of a part: configurations, an Excel design table or one file per variant.
Material, mass, volume, centre of gravity and dimensions of the part.

More capabilities

Shall we try it with your parts?

We'll show you Vega live, with your models and your way of working.

Request a demo